Skip to content
Karkas CLOSED BETA TR

One install · three trades

What does your workshop do?

TR

Pick a trade: the page shows that trade's story, its real outputs and its questions.

Karkas CNC · router and panel saw

Open the customer's file, nest it, cut it.

No cabinet design needed. For the router, a DXF or DWG comes in, its layers are mapped to operations, the sheet is machined on screen and the G-code for your machine is written. For the panel saw, a cutting list comes in and a strip-by-strip cut plan comes out. The sheet count and the price are known at the start of the job.

Cutting on a panel saw? Cut plans from a cutting list

  • True-shape nestingthe sample job's 48 parts fit on 3 sheets instead of 4
  • Weihong · Syntec · Mach3 · ISOG-code for four controllers
  • Layer = operationsave the template once
  • Per minute + per m²job list and job summary PDF
  • Simulationdepth, collisions, uncut areas
Sample kitchen · levha-4.ncPreparing the tool path…

          
Loading the sheet…
  1. 01The fileDXF, DWG, .karkas, STL
  2. 02Layer = operationKnown by the template, asked if new
  3. 03NestingTrue shape, grain, waste
  4. 04SimulationChecked before the machine
  5. 05G-codeFor your controller
  6. 06PriceMinutes + m², VAT, PDF

Real files the program wrote, with their Turkish text: levha-ornek.nc cnc-levhalar.zip fason-kesim.xlsx kesim-plani-ornek.pdf

Karkas CNC · CNC router

One job, start to finish

Six steps from the file arriving to the G-code going to the machine. The numbers in the windows are the real data the program produced for the sample kitchen.

01

The customer's drawing opens as it is.

DXF and DWG are read with nothing extra to install. Broken lines are joined into closed outlines and the units are checked. Anything missing is written in the report; no line is dropped without a word.

  • DrawingsDXF, DWG (R14 to 2018)
  • ModelsSTL, OBJ, 3MF
  • Projects.karkas: the cabinet maker's file
Importmm

Loading the report…

02

Which line is a cut and which a groove: say it once.

Each layer name is mapped to an operation and saved as a template. The same customer's next file is recognised by itself; depth and diameter are read from the layer name.

  • WildcardsKANAL_Z{depth}, DELIK_D{diameter}
  • Templatesyour shop's own templates
  • Ready-madeKarkas, Dekor fretwork, Dekor V-carve
Layer template · Karkasbuilt in

Loading the layers…

03

Parts onto the sheet, waste kept down.

Parts are grouped by material and thickness; grain direction is kept, and a gap the width of the cutter and an edge margin are left. Waste trapped between parts is flagged with a warning.

Free-form parts such as arches, L-shapes, triangles or frames with an open centre are nested by their own shape: they go into each other's gaps and into large cut-outs, and turn 180° where needed. The program picks this layout when it uses fewer sheets or leaves clearly bigger offcuts. In the sample job the same 48 parts take 4 sheets nested as boxes and 3 nested by true shape.

  • Gapthe cutter's diameter
  • Edgea 12 mm margin
  • Graindirection kept
  • Shapetrue outline, nesting into gaps, 180° turns
Nesting · sample kitchen3660 × 1830

Loading the sheets…

True-shape nesting · sample job48 parts · 18 mm

Loading the layout…

  • Part
  • Turned 180°
  • Inside another part's cut-out
04

The sheet is machined on screen before it goes to the machine.

The order is fixed: holes, grooves, inside cuts, outside profiles. On the outside profiles small parts go first, and a part nested in a cut-out is cut before that cut-out. Ramp and helical entry, tabs. The simulation checks depth, collisions and uncut areas; a missing tool is written as a warning.

  • Entryramp, helix
  • Hold-downtabs or the sheet margin
  • Timeminutes per program
Operations · sheet 4

Loading the operations…

05

Written for your machine's controller.

Four controller profiles are ready. Enter the bed size: a program that does not fit is never written, and a sheet that fits only when turned is turned 90°. On a manual tool change, a line telling the operator to set Z zero again goes into the program.

  • ProfilesISO, Weihong, Syntec, Mach3
  • Toolstool changer or manual change
  • Safetya dwell after spindle start, Z up
levha-ornek.nc

Loading the program…

06

The time is known, so the price is ready.

Each job is saved with its customer, file, sheet count and time. The price comes from a template with a rate per minute and per m²; a set-up fee, a minimum charge and VAT are added. The job summary goes to the customer as a PDF.

  • Templaterate per minute + per m², by material
  • Statusquote → approved → cut → delivered
  • Recordsthe job opens even if the DXF is deleted
Job summarysample rates, Turkish lira

Loading the job…

Panel saw · cut plans

A cutting list comes in, a cut plan for the saw comes out.

No router? The job starts in the same place. The customer's cutting list is read, the parts are laid out on the sheet strip by strip, the operator follows the cuts in order, and the job is priced per sheet and per metre of edge banding. The numbers in the windows are the real data the program produced for the sample list.

01

The list is taken the way it comes.

The customer types out the sizes, pastes them from Excel or takes a photo of the paper, and free-form lines turn into parts. The sample here is a Turkish customer's list, shown as it was written. A photo is read inside the program and is never sent anywhere.

The lines it read open next to the list; a cell the program is unsure of is marked, and no job is made until you approve it. A printed list reads best; handwriting is not always read correctly. If the sizes are finished sizes, the banding is taken off the cut size.

  • Sourcetyped, pasted, Excel / CSV, a photo
  • Linessize, quantity and banding, as the customer wrote them
  • Checkdoubtful cells marked, the last word is yours
  • Sizesfinished or cut
Cutting list · sample kitchen

Loading the list…

02

The sheet is split strip by strip, and the cuts are followed in order.

Pick the panel saw as the cutting machine and the plan is built the way the saw can cut it: the edge trim first, then the strips, the segments from each strip and a recut where needed. Each step shows the fence setting and the parts that come off with that cut.

Saw kerf, edge trim, the direction of the first cut and the number of stages are the shop's own settings; the sheet size is set per material. Sheets that share a plan are listed together and can be cut as a stack. The sample list's 59 parts come out of 3 sheets in 107 cuts.

  • Saw kerf4.4 mm
  • Edge trim10 mm
  • Stages3: strip, segment, recut
  • Sheet2800 × 2100, per material
  • Outputstep by step on screen, a PDF for the saw

Open the sample plan as a PDF →

Cut plan · sample kitchen2800 × 2100 · 18 mm

Loading the plan…

  • On the sheet
  • Off with this cut
  • Already off
  • Offcut
  • This cut
03

Cutting per sheet, banding per metre: the price is ready.

A panel saw job is priced by sheets, not by time. Write the cutting rate per sheet and the banding rate per metre into the price template once; each job is priced by the sheets in its plan and the metres of banded edge in its list.

The set-up fee, minimum charge and VAT come from the same template. In the job list a panel saw job opens its cut plan and a router job its G-code; the job summary goes to the customer as a PDF.

  • Templaterate per sheet + per metre of banding
  • Banding metresfrom the long and short edges banded in the list
  • Machineper job: saw or router
Job summary · panel sawsample rates, Turkish lira

Loading the job…

A cabinet maker's file is cut here without fixing.

A customer who uses Karkas sends the .karkas project or the DXF that Karkas wrote. Layer names, part numbers and labels mean the same thing on both sides: no more phoning to confirm sizes, no more redrawing.

Specifications

What the program does today.

Every line of this list works in the closed beta version.

Input formats
DXF, DWG, STL, OBJ, 3MF, .karkas
Entities read
Line, arc, circle, ellipse, polyline, spline, blockText and dimension entities are counted in the report
Operations
Drilling, grooves, pockets, inside and outside profiles, V-carving, 3D relief
Tools
Flat, V (60° / 90° / 120°), ball-nose, drillDiameter, speed, feed, plunge and step-down per tool
Nesting
By material and thickness, grain direction, cutter allowance, edge marginFree-form parts by their true outline: nesting into gaps, 180° turns
Cutting lists
Typed, pasted, Excel / CSV or a photoDoubtful cells marked; finished or cut sizes
Controllers
ISO / Fanuc-like, Weihong / NcStudio, Syntec, Mach3
Simulation
Depth, collisions, uncut areas, minutes
Panel saw
Strip-by-strip plans: 2 or 3 stages, saw kerf, edge trimCut by cut on screen; sheet size per material
Documents
Part labels + QR, label map, cut list, cut plan, job summary PDF
Pricing
Per minute, per sheet, per m², per metre of bandingSet-up fee, minimum charge, VAT
System
Windows 10 / 11, 64-bit, 8 GB memory

Real outputs

Open them, look, try them in your own software.

The program made these files itself, so their comments and text are in Turkish. Download them and open them in your simulator or your machine's software.

Questions

Frequently asked.

If your question isn't here, write to us; the answer comes straight from the developer.

Which files does it take?

DXF and DWG drawings, STL / OBJ / 3MF reliefs and models, Karkas projects (.karkas) and cutting lists: typed, Excel / CSV or a photo. A drawing opens with a layer template, is nested on the sheet and goes to G-code; a cutting list turns into parts; an STL relief is carved into a door or a panel.

I have no router, I cut on a panel saw. Is it any use to me?

Yes. Pick the panel saw as your cutting machine and the sheet count, labels and cut plan are worked out the way the saw can cut them, strip by strip. Saw kerf, edge trim, the direction of the first cut and 2 or 3 cutting stages are your settings; the sheet size is set per material. You follow the plan cut by cut on screen, and it goes to the saw as a PDF. The job is priced per sheet cut and per metre of banding. If you also have a router, G-code is always written from the router layout; a saw plan is never sent to the CNC.

Customers send me a photo of their cutting list. Can it read it?

It reads it and leaves the last word to you. The photo is read inside the program and is never sent anywhere. The lines it read open next to the photo and any cell it is unsure of is marked; once you approve the lines, the list becomes a job. A printed list reads best; handwriting is not always read correctly, so look over every line. Today the reader knows the shorthand Turkish shops write for quantities and edge banding.

Does it nest free-form parts as boxes?

No. Arches, L-shapes, triangles or frames with an open centre are nested by their own outline: small parts go into the gaps of big ones, a part turns 180° where needed, and grain direction is kept. The program compares this with nesting as boxes and uses the layout with fewer sheets or clearly bigger offcuts. A part nested in a cut-out is cut before that cut-out.

Which machines does it work with?

G-code is written today for ISO / Fanuc-like, Weihong / NcStudio, Syntec and Mach3 controllers. Enter your bed size; a program that does not fit is never written. If you have another controller, write and tell us which one.

Can it open my ArtCAM files (.art)?

No. We don't read closed project formats. Files you export from ArtCAM, Aspire or VCarve as STL or DXF open in Karkas CNC, and STL reliefs bought from relief sellers can be used as they are.

I carve decorative panels and lettering. Which page is mine?

Karkas Dekor: the same job mode, opened with presets for fretwork, V-carving and STL reliefs. Its jobs sit in the same list as the CNC jobs on this page, and one licence covers both.

Can I use it for cabinet design too?

Yes. Karkas CNC is a separate door into Karkas; with the same install you build cabinets and get cut lists and renders. Details on the cabinets page.

Early access

Hear first when Karkas CNC is in English.

Karkas is in closed beta with shops in Turkey, and its interface, documents and G-code comments are in Turkish today. An English version is being built. Leave your email and we will write to you when it is ready to try; your own files will help shape it.

System
Windows 10 / 11, 64-bit
Memory
8 GB

Closed beta
Windows 10 / 11

Early access